Wheel Chair Platform
(Optional on PRO1000 and PRO II, Standard on PRO1)
The wheelchair platforms are flat steel sheets, nicely powder coated in silver and rounded at the corners. They fit into the inside channels of the seat system and can be installed in the field. The platforms do not change the seat removal. The tie downs are adjustable straps with clips at each end. They fix to the wheelchair and the PRO1, PRO1000 or PROII at the front cross tube. The footrest must be removed to expose the tie down anchors on the PRO1 and PRO1000.
High Support Boots with bars
(Optional on PROII)
A plastic calf high boot which is open at the front and has Velcro straps to keep the legs in place. They come with the crank bars for easy installation and removal.
(Optional on PRO1, PRO1 Sport, PRO1000 & PROII)
A glove with a Velcro looping system to keep the hands fixed to the crank arms. Gloves are available in small, medium or large.
Low Support Boots with bars
(Optional on PROII)
The footplate has a lip at the back to keep the feet from sliding off the pedal. Open at the front and has Velcro straps to keep the feet in place. They come with crank bars for easy installation and removal.
(Goes with wheelchair platform)
The tie downs are adjustable straps with clips on each end. They fix to the wheelchair and the PRO1000 or PROII at the front cross tube.
Adjustable Crank Arms
(Standard on PRO1, PRO1 Sport and PROII, optional on PRO1000)
Provides the ability to add or reduce range of motion. Range settings are at 6", 7" & 8 ". The left side crank can be reversed so the unit’s cranks arms work in unison. Similar to a rotary rowing motion: both forward and reverse. This is ideal for medical situations where torso rotation is undesirable. It is also more natural for wheelchair racers. (Please see the PRO1, PRO1 Sport, PRO1000 and PROII)
External Rotation Device (Rotator Cuff)
Provides a means of remedial exercise for rotator cuff injuries. Adjustable load, crank lever length and height ensure a wide range of combinations.
Vertical Seat Adjustment with rotation
Gives the user the ability to adjust the body more accurately in environments where axis of rotation is critical
Low Back Sports Seat
Removes shoulder impingement allowing and unrestricted use of the upper body.
Polar Transmitter W/ Chest Strap
The Polar chest strap system is required for heart rate monitoring on all Scifit products
12v Plug Pack
External 240v to 12 v plug pack allows external charging of the internal back up battery.
Can be used to permanently keep the panel display on at all times